Mix and Match™ CHIRP Cables

Many CHIRP transducers are now made as Mix and Match models. These versions use a common base transducer with an attached 9-meter cable, plus an interchangeable short (1-meter) brand-specific adapter cable. Both parts are needed for an installation. The base transducer can be used with any brand of sounder by selecting the appropriate adapter.

The permanently-attached 9-meter transducer cable ends in an Airmar 12-pin female connector. This cable is run up through the boat to the equipment location. The short adapter cable has an Airmar 12-pin male connector at one end, to connect to the transducer cable, and a brand-specific connector at the other end to connect to the sounder or display.

CHIRP Mix and Match cables cannot be used with 600W or 1kW conventional transducers.