SS175 High Chirp, 1kW, 0° Tilt, Bare Wire, DT, Dedicated Cable

SS175 High Chirp, 1kW, 0° Tilt, Bare Wire, DT, Dedicated Cable

Part #SS175C-0-H

MFG #41-610-1-01-NLA

$1,135.90 / ea

1 kW

Airmar’s low-profile, Chirp-ready, transducer models are the perfect addition to smaller boats such as center consoles. The high-frequency band, transmitting between 130 and 210 kHz, has a narrow beamwidth—excellent for pinpointing fish holding tight to wrecks, reefs, and other structures. High frequency also shows amazing target separation on baitfish and schooling gamefish. The SS175H delivers up to 80 kHz of total bandwidth in just one installation for superior shallow-water performance and bottom detail.

Tilted Element^™ transducers have the element fixed at a 20°, 12°, or 0° angle within the housing. Because the transducer is installed almost flush to the hull, the tilt corrects for the hull deadrise. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.

The SS175H is available in three Tilted Element models:

Fixed 20° tilted version for 16 to 24° hull deadrise angles
Fixed 12° tilted version for 8 to 15° hull deadrise angles
Fixed 0° tilted version for 0 to 7° hull deadrise angles

Depth and fast-response water-temperature sensing
1 kW of power with a maximum depth of 304 m (1000')
High frequency: 130 to 210 kHz

10° to 6° beamwidth

80 kHz of total bandwidth from one transducer
High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation
Low-profile, thru-hull housing provides good display resolution at speed when installed properly
Recommended for stepped, planing, or displacement hull
Stainless steel housing for use in all hull materials
Also available in a bronze housing (B175H) for use in a fiberglass or wood hull
Patented Xducer ID^™ technology