Bilge High Water Detector (SIM100 Accessory)
Part #BHW100
MFG #BHW100
$61.00 / ea
This BHW100 Bilge High Water Detector is an available accessory for the SIM100. The sensor has a target molded into the plastic enclosure (opposite the side with the Maretron label). The target should be exposed so that when the water rises above the middle of the target, the BHW100 will indicate high water by illuminating the red LED and sending a signal to the Maretron Switch Indicator Module (SIM100). It should be mounted to a vertical wall in the bilge. The BHW100 acts immediately to rising water.
BHW100 cable contains one blue and one brown wire.
- Brown wire: Connect to a free switch channel "A" terminal on the SIM100 (Example: SW1A).
- Blue wire: Connect to the corresponding terminal (Example: SW1B).
Brown wire must be connect to the "A" terminal of the switch channel and the Blue wire must be connected to the "B" terminal of the switch channel. Reversing this connection will cause a malfunction.
- Brand: MaretronCable-Length: 3 m (10')Comm Method: AnalogConnector: Bare WireCountry of Origin: ChinaExterior Color: Black/Blue
$61.00 / ea
