• Search:

1kW Mix & Match Transducers

Mix & Match 1kW transducers are made in two parts. The base transducers are generic models that will work with a wide variety of different equipment. These are indicted by the suffix 'MM' (e.g. TM260-MM). Base transducers have a 2m cable attached and this cable ends in a female 9-pin connector.

To install an 'MM' transducer you will also need an 1kW adapter cable for a specific brand of equipment. Mix & Match 1kW adapter cables have a male 9-pin connector at one end and a brand-specific connector at the other end. They are 8m long.

If a user changes sonar or fishfinder equipment to a different brand the transducer can be left in place. Only the adapter cable needs to be changed.

Base transducers with just a 2m pigtail are sold as '-MM' models. Kits consisting of a base transducer plus a 1kW cable for a specific equipment brand are also available (e.g. M260-8G is a kit containing 1 x M260-MM transducer plus 1 x MM1-DST-8G cable).

Mix and Match 600W System
Part Part # Description Brochure Installation
B164-0-MM

B164-12-MM

B164-20-MM
Low-profile thru-hull 50/200kHz bronze model with either zero°, 12° or 20° tilt.

Depth and temperature.

This transducer can be used with any 1kW Mix and Match Cable.
B258-MM Thru-hull bronze 50/200kHz model with fairing.

Depth and temperature.

This transducer can be used with any 1kW Mix and Match Cable.
B260-MM Thru-hull bronze 50/200kHz model with fairing.

Depth and temperature.

This transducer can be used with any 1kW Mix and Match Cable.
M260-MM In-Hull 50/200kHz model with tank.

Depth only, no temperature sensor.

This transducer can be used with any 1kW Mix and Match Cable.
SS164-0-MM

SS164-12-MM

SS164-20-MM
Low-profile thru-hull 50/200kHz stainless steel model with either zero°, 12° or 20° tilt.

Depth and temperature.

This transducer can be used with any 1kW Mix and Match Cable.
SS260-MM Thru-hull stainless steel 50/200kHz model with fairing.

Depth and temperature.

This transducer can be used with any 1kW Mix and Match Cable.
TM258-MM Transom-mount 50/200kHz model with bracket.

Depth and temperature.

This transducer can be used with any 1kW Mix and Match Cable.
TM260-MM Transom-mount 50/200kHz model with bracket.

Depth and temperature.

This transducer can be used with any 1kW Mix and Match Cable.