• Search:

Thru-Hull Low Profile Transducers

These transducers mount in the hull and have a smooth low-profile shape on the outside of the hull. They do not need a fairing.

Some models have a tilted internal ceramic so that they can be installed the side of the hull and still point their sonar beam downwards. Transducers with no tilt are suitable for hull sections with a deadrise up to 7° from the horizontal. Models with a 12° tilt are for deadrise angles from 8° to 15°. Models with a 20° tilt are for deadrise angles from 16° to 24°.

The models listed here are conventional transducers that use fixed frequencies. For CHIRP transducers, see the Single-Band and Dual-Band CHIRP pages. For Smart transducers with NMEA output see the Smart Transducers page.

Part Part # Description Brochure Installation
B60 Low-profile 600W bronze thru-hull 50/200kHz model with either 12° (-12) or 20° (-20) tilt.

Depth and temperature.

This transducer can be used with any 600W Mix and Match Cable.
B117 Low-profile 600W bronze thru-hull 50/200kHz model with zero degree tilt.

Depth and temperature.

This transducer can be used with any 600W Mix and Match Cable.
000-11133-001 (0°)

000-11134-001 (12°)

000-11135-001 (20°)
B148 low-profile bronze thru-hull 50/200kHz and 455/800kHz Hybrid Dual Imaging transducer for Lowrance.

Depth and temperature

For Lowrance blue 7-pin connectors only.
B164 Low-profile 1kW bronze thru-hull 50/200kHz model with either 0° (-0), 12° (-12) or 20° (-20) tilt.

Depth and temperature.

This transducer can be used with any 1kW Mix and Match Cable.
010-10217-21 (12°)

010-10217-22 (20°)
B619 low-profile 500W bronze thru-hull 77/200kHz model with either 12° or 20° tilt.

Depth and temperature.

This transducer is for Garmin 8-pin equipment only.
D800 Low-profile 250W thru-hull 170kHz or 200kHz only model with either a plastic (P) or a bronze (B) housing.

Depth only, no temperature sensor.

The 200kHz (-200) versions of this transducer are available for Autohelm ST50 (-2), Datamarine (-RCA), Garmin (-6), Fuji 3-Pin (-3), ST60 (-FISO) and bare wire (-0).

The 170kHz (-170) version of this transducer is available for B&G 3-Pin (-BG).

Example : D800B-200-2 is a bronze 200kHz version for ST50.
DST800 Low-profile 100W 200kHz thru-hull triducer with a plastic (DST800P-A) or bronze (DST800B-A) housing. This is an analog version of the DST800.

Depth, speed and temperature.

For Raymarine ST60 and compatible instruments only.
P8 Low-profile short 250W thru-hull 200kHz only model with a plastic housing.

Depth only, no temperature sensor.

This transducer is available for Datamarine (P8-200-RCA) or Raymarine ST60 (P8-200-FISO).
P19-200-DT6 (0°)

010-10218-21 (12°)

010-10218-22 (20°)
Low-profile thru-hull model with plastic housing and 0°, 12 ° or 20° tilt.

Depth and temperature.

0° tilt model is 350W 200kHz and is for Garmin 6-Pin equipment.

12° and 20° tilt models are 500W 77/200kHz and are for Garmin 8-Pin equipment.
P319 Low-profile 600W plastic thru-hull 50/200kHz model with zero degree tilt.

Depth and temperature.

This transducer can be used with any 600W Mix and Match Cable.
SS60 Low-profile 600W stainless steel thru-hull 50/200kHz model with either 12° (-12) or 20° (-20) tilt.

Depth and temperature.

This transducer can be used with any 600W Mix and Match Cable.
SS164 Low-profile 1kW stainless steel thru-hull 50/200kHz model with either 0° (-0), 12° (-12) or 20° (-20) tilt.

Depth and temperature.

This transducer can be used with any 1kW Mix and Match Cable.
SS264N Pairs Low-profile 1kW stainless steel thru-hull transducers in matching pairs with 12° (-12) or 20° (-20) tilt.

Each pair consists of one SS264-N2 200kHz narrow beam transducer and one SS264-W5 50kHz wide-beam transducer.

Depth and temperature.

SS264 pairs have fixed cables and are available for most common equipment brands.