Adapter Cables

These short cables enable a transducer to be used with equipment of another brand. The image on the left shows the existing connector on the transducer cable. The image on the right shows the new connector, to plug into the new sounder or fishfinder.


Do not use these adapters if you have a Mix and Match transducer - use the appropriate Mix and Match 600W or 1kW cable instead.

Existing Connector Adapter Cable Part # Description New Connector
010-11612-00 Adapts Garmin blue 8-pin to legacy black 6-pin
010-11613-00 Adapter box that enables Garmin 6-pin transducers to be used with Garmin blue 8-pin equipment. Can also be used with many other non-Garmin 50/200kHz 600W transducers. Connectors must be removed for hardwiring into the adapter box.
010-11613-10 Adapter box that enables bare wire CHIRP transducers to be used with Garmin CHIRP 12-pin equipment.
010-11615-00 Adapts Garmin black 6-pin to double 4-pin equipment.
010-11947-00 Adapts Garmin blue 8-pin to double 4-pin equipment.
20-001 Adapts 6-pin Navman/Northstar transducer to Lowrance blue 7-pin equipment. This 6-pin connector is also used by Simrad NX 40/45.
33-562-01 Adapts Raymarine A-series, a/c/e-series (-RAYA) transducer to DSM250/300 (-RAY) equipment
A102147 Allows legacy Raymarine DSM250/300 (-RAY) transducers to be used with the CP450C. The CP450C must be run in non-CHIRP mode.
ADAPT-8-6DO Adapts Furuno 8-pin depth/temp transducer (-8F) to Garmin 6-pin equipment (-6G). For use with transducer without temperature or with failed temperature sensor.
ADAPT-8-6DT Adapts Furuno 8-pin depth/temp transducer (-8F) to Garmin 6-pin equipment (-6G). Cannot be used without a functional temperature sensor.
ADAPT-8-10 Adapts Furuno 8-pin transducer (-8F) to 10-pin Furuno equipment (-10F)
ADAPT-10-6DTV2 Adapts Furuno 10-pin depth/temp transducer (-10F) to Garmin 6-pin equipment (-6G). Cannot be used without a functional temperature sensor.
ADAPT-10-7 Adapts Furuno 10-pin transducer (-10F) to Simrad/JRC/Raytheon 7-pin equipment (-7)
ADAPT-10-8 Adapts Furuno 10-pin transducer (-10F) to older Furuno/Raytheon 8-pin equipment (-8F)
ADAPT-10F-10N Adapts Furuno 10-pin transducer (-10F) to Northstar 10-pin equipment (-10N)
ADAPT-L750 Adapts Raymarine DSM250/300 (-RAY) style transducer to function with the Raymarine L750
Digital A
Digital B
Digital F
E66066 Adapts Raymarine DSM250/300 (-RAY) style transducer to A-series, a/c/e-series (-RAYA) equipment
E66070 Allows pre-50/200kHz L-Series (up to the L470) transducer to be used with A-series, a/c/e-series (-RAYA) equipment. Does not pass speed.
TA-BL2U-T Adapts Navico 200kHz transducer with blue 7-pin connector to equipment with black Uniplug.