• Search:

Adapter Cables for Transducers with Furuno 8-Pin connectors

To convert a transducer with a fixed cable ending in a Furuno 8-Pin connector as shown, see the recommendations in the table. Do not use these adapters if you have a Mix and Match transducer - use the appropriate Mix and Match 600W or 1kW cable instead.


Existing Connector : Furuno 8-Pin
Required Connector Name Recommendation
Furuno 10-Pin Use cable ADAPT-8-10
Furuno 8-Pin No adapter needed.
Garmin 6-Pin Use cable ADAPT-8-6DO (no temp sensor) or ADAPT-8-6DT (temp sensor present).
Garmin 8-Pin Use Garmin 010-11613-00 Adapter Box
Lowrance Blue 7-Pin Connector B744V/VL, P66 : Not possible - Temperature not compatible

B164, B258, TM258 : Hardwire with part 33-561-01

B260, SS270W, SS264 : Not possible - Impedance too low.
Navman 6-Pin B744V/VL, P66 : Not possible - Speed not compatible

B164, B258, TM258 : Hardwire with part CX-106

B260, SS270W, SS264 : Not possible - Impedance too low.
Northstar 10-Pin B744V/VL, P66 : Use cable adaptors ADAPT-8-10 plus ADAPT-10F-10N

B164, B258, TM258 : Use cable adaptors ADAPT-8-10 plus ADAPT-10F-10N (600W operation only)

B260, SS270W, SS264 : Not possible.
Raymarine DSM-300 B744V/VL, P66 : Not possible - Speed not compatible

B164, B258, TM258 : Not possible - Raymarine requires sense line

B260, SS270W, SS264 : Not possible - Raymarine requires sense line
Raymarine A-Series B744V/VL, P66 : Not possible - Speed not compatible

B164, B258, TM258 : Not possible - Raymarine requires sense line

B260, SS270W, SS264 : Not possible - Raymarine requires sense line
Simrad/JRC/Raytheon 7-Pin B744V/VL, P66 : Use cables ADAPT-8-10 plus ADAPT-10-7

B164, B258, TM258 : Use cables ADAPT-8-10 plus ADAPT-10-7

B260, SS270W, SS264 : Not possible.