• Search:

Adapter Cables for Transducers with Garmin 6-Pin connectors

To convert a transducer with a fixed cable ending in a Garmin 6-Pin connector as shown, see the recommendations in the table. Do not use these adapters if you have a Mix and Match transducer - use the appropriate Mix and Match 600W or 1kW cable instead.



Warning : Garmin and Navman both use the CX-106 connector but the transducer wiring is not the same.


Existing Connector : Garmin 6-Pin
Required Connector Name Recommendation
Furuno 10-Pin Hardwire to cable 33-333, pigtail with 10F connector.
Furuno 8-Pin Hardwire to cable 33-333, pigtail with 10F connector, then use cable ADAPT-10-8
Garmin 6-Pin No adapter needed.
Garmin 8-Pin Use Garmin 010-11613-00 Adapter Box
Lowrance Blue 7-Pin Connector B744V/VL, P66 : Not possible - Temperature not compatible

B164, B258, TM258 : Hardwire with part 33-561-01 for depth only

B260, SS270W, SS264 : Not possible - Impedance too low.
Navman 6-Pin B744V/VL, P66 : Not possible - Speed not compatible

B164, B258, TM258 : Hardwire with part CX-106

B260, SS270W, SS264 : Not possible - Impedance too low.
Northstar 10-Pin B744V/VL, P66 : Hardwire to CX-1010 (10N connector)

B164, B258, TM258 : Hardwire to CX-1010 (10N connector) - 600W operation only

B260, SS270W, SS264 : Not possible.
Raymarine DSM-300 B744V/VL, P66 : Not possible - Speed not compatible

B164, B258, TM258 : Not possible - Raymarine requires sense line

B260, SS270W, SS264 : Not possible - Raymarine requires sense line
Raymarine A-Series B744V/VL, P66 : Not possible - Speed not compatible

B164, B258, TM258 : Not possible - Raymarine requires sense line

B260, SS270W, SS264 : Not possible - Raymarine requires sense line
Simrad/JRC/Raytheon 7-Pin B744V/VL, P66 : Hardwire to CX-107 (7-Pin connector)

B164, B258, TM258 : Hardwire to CX-107 (7-Pin connector)

B260, SS270W, SS264 : Not possible.